PC kabeļi

Unica System+ modulaariset ja helposti asennettavat yksiköt sopivat työpöytäasennuksiin sekä lattiapylväiden koostamiseen. Yksiköt kiinnitetään pylvääseen päätypalan tai välipalan avulla. Ruuvikiinnitys pöytään onnistuu päätypalan avulla ja puristyskiinnitys pöytälevyyn myös päätypalan avulla. Yksiköt kiinnitetään toisiinsa pikaliittimillä (Mini-Wieland). Värivaihtoehtoina valkoinen, antrasiitti, valkoinen/harmaa ja antrasiitti/harmaa. Materiaali alumiini tai alumiini/tekstiili. Tämä yksikkö on varustettu 4 x Schuko pistorasialla ja kahdella latausyksiköllä, USB-A ja USB-C. Schuko pistorasia 16 A / 250 V, latausyksiköt 5 V / 2,4 A. Yksikön koko 64x64x308 mm. Väri antrasiitti/alumiiniosat ja harmaa/Kvadrat tekstiiliosat.

Kods: INS44235

USB Cables

With this Club3D USB 3.2 Gen1 Active Repeater Cable CAC-1406, you can go far beyond the standard USB Cable length limitation of 3 meters /9.84 feet, without loss of Data Transfer Speed. The USB 3.2 Gen1 Active Repeater Cables are fully Plug & Play and do not require any driver installation. Just connect your external USB device like External HDD/NAS/Digital Camera or External USB Graphics to your system with the CAC-1406 and have flexibility of the increased 15 meters / 49.2 feet of extra cable length. Also for a VR experience at the sofa away from the notebook or PC this cable provides you with the freedom of movement.The CAC-1406 supports data transfer rates up to 5Gbps over the full length of the cable.For powering the repeater, we included our CAC-1408, an USB Type A to Micro USB M/M cable of 1m/3.28ft. You have the flexibility to power the CAC-1406 on each of the repeaters or at the end with the provided CAC-1408.USB 3.2 Gen1 SuperSpeed specificationSupports data transfer speeds up to 5 GbpsPlug and play functionalityExternal power can be applied to each of the repeatersNo drivers requiredCable: 28AWG, OD: 5.5mmWindows™ and Mac OSX™ compatible

Kods: CAC-1406

USB Cables

DIGITUS USB Type-C - USB Type-C AOC Hybrid FO cable 4K 60Hz USB 3.1 SPEC 10m

Kods: AK-330160-100-S

USB Cables

The Lindy 8m USB 3.0 Active Extension Cable Pro is a high-performance cable that allows a computer to connect to USB 3.0 SuperSpeed peripherals over long distances. It supports data transfer speeds of up to 5Gbps, making it ideal for quickly and reliably transferring large amounts of data.The cable incorporates proven active technology and locking connectors to ensure reliable signal integrity, even in demanding environments.This 8m extension cable can be used on its own or as part of the Lindy USB 3.0 Active Extension System Pro. This system is a modular solution that combines multiple USB Active Extension Pro cables and a USB 3.0 Active Extension Pro hub. It enables the distribution of USB signals to up to 4 devices at distances of up to 40m (depending on the cable configurations used).Using this cable as part of the USB 3.0 Active Extension System ProIf you would like to use this cable as part of combined Lindy USB 3.0 Active Extension System Pro installation, please note the requirements below.The first unit connected to your computer must always be the USB 3.0 Active Extension Pro 8m (No. 43158) or 15m (No. 43229). Once the first cable is connected, you can cascade additional Extension System Pro cables to extend the distance up to a maximum of 40m.The final part of the extension can be any cable or hub from the Extension System Pro range.If you need to extend multiple devices or connect a USB device with high power requirements, you should use the 10m Hub Pro unit (No. 43159) with its power supply as the final part of the extension.Information about USB 3.0, 3.1 and 3.2USB 3.0, USB 3.1 and USB 3.2 PCs, cables and devices are all compatible with each other, when using either a USB Type A or USB Type C host interface.USB 3.0, USB 3.1 Gen 1 and USB 3.2 Gen 1 all support data transfer rates up to 5 Gbps. USB 3.1 Gen 2 and USB 3.2 Gen 2 both support data transfer rates up to 10 Gbps.High performance, active cable that provides an extended 8m connection between a computer and USB 3.0 deviceCan be used standalone or as part of the Lindy Active Extension System Pro to create bespoke extension systems of over 40m (depending on the cables used)Supports the full USB 3.0 SuperSpeed bandwidth for speeds of 5GbpsEasy to use – connects to the deviceandrsquo;s existing USB cable (2m maximum)2 year warranty

Kods: 43158

PC kabeļi

Unica System+ modulaariset ja helposti asennettavat yksiköt sopivat työpöytäasennuksiin sekä lattiapylväiden koostamiseen. Yksiköt kiinnitetään pylvääseen päätypalan tai välipalan avulla. Ruuvikiinnitys pöytään onnistuu päätypalan avulla ja puristyskiinnitys pöytälevyyn myös päätypalan avulla. Yksiköt kiinnitetään toisiinsa pikaliittimillä (Mini-Wieland). Värivaihtoehtoina valkoinen, antrasiitti, valkoinen/harmaa ja antrasiitti/harmaa. Materiaali alumiini tai alumiini/tekstiili. Tämä yksikkö on varustettu 4 x Schuko pistorasialla, kahdella latausyksiköllä, USB-A ja USB-C sekä tilavarauksella Unica-datayksikölle. Schuko pistorasia 16 A / 250 V, latausyksiköt 5 V / 2,4 A. Yksikön koko 64x64x421 mm. Väri antrasiitti/alumiiniosat ja harmaa/Kvadrat tekstiiliosat.

Kods: INS44259

USB Cables

The Lindy 10m USB 3.0 Active Extension Cable Pro is a high-performance cable that allows a computer to connect to USB 3.0 SuperSpeed peripherals over long distances. It supports data transfer speeds of up to 5Gbps, making it ideal for quickly and reliably transferring large amounts of data.The cable incorporates proven active technology and locking connectors to ensure reliable signal integrity, even in demanding environments.This 10m extension cable can be used on its own or as part of the Lindy USB 3.0 Active Extension System Pro. This system is a modular solution that combines multiple USB Active Extension Pro cables and a USB 3.0 Active Extension Pro hub. It enables the distribution of USB signals to up to 4 devices at distances of up to 40m (depending on the cable configurations used).Using this cable as part of the USB 3.0 Active Extension System ProIf you would like to use this cable as part of combined Lindy USB 3.0 Active Extension System Pro installation, please note the requirements below.The first unit connected to your computer must always be the USB 3.0 Active Extension Pro 8m (No. 43158) or 15m (No. 43229). Once the first cable is connected, you can cascade additional Extension System Pro cables to extend the distance up to a maximum of 40m.The final part of the extension can be any cable or hub from the Extension System Pro range.If you need to extend multiple devices or connect a USB device with high power requirements, you should use the 10m Hub Pro unit (No. 43159) with its power supply as the final part of the extension.Information about USB 3.0, 3.1 and 3.2USB 3.0, USB 3.1 and USB 3.2 PCs, cables and devices are all compatible with each other, when using either a USB Type A or USB Type C host interface.USB 3.0, USB 3.1 Gen 1 and USB 3.2 Gen 1 all support data transfer rates up to 5 Gbps. USB 3.1 Gen 2 and USB 3.2 Gen 2 both support data transfer rates up to 10 Gbps.High performance, active cable that provides an extended 10m connection between a computer and USB 3.0 deviceCan be used standalone or as part of the Lindy Active Extension System Pro to create bespoke extension systems of over 40m (depending on the cable configurations used)Supports the full USB 3.0 SuperSpeed bandwidth for speeds of 5GbpsEasy to use – connects to the deviceandrsquo;s existing USB cable (2m maximum)2 year warranty

Kods: 43157

PC kabeļi

Digitus 4K USB Type-C AOC AV Connection Cable , AK-330160-150-S

Kods: AK-330160-150-S

PC kabeļi

1200 MHz transmission frequency; Permanent link certified; PoE Power over Ethernet support

Kods: DK-1741-VH-1-OD

PC kabeļi

Unica System+ modulaariset ja helposti asennettavat yksiköt sopivat työpöytäasennuksiin sekä lattiapylväiden koostamiseen. Yksiköt kiinnitetään pylvääseen päätypalan tai välipalan avulla. Ruuvikiinnitys pöytään onnistuu päätypalan avulla ja puristyskiinnitys pöytälevyyn myös päätypalan avulla. Yksiköt kiinnitetään toisiinsa pikaliittimillä (Mini-Wieland). Värivaihtoehtoina valkoinen, antrasiitti, valkoinen/harmaa ja antrasiitti/harmaa. Materiaali alumiini tai alumiini/tekstiili. Tämä yksikkö on varustettu 2 x Schuko pistorasialla, 2 x Schuko UPS pistorasialla (punainen), kahdella latausyksiköllä (USB-A ja USB-C) sekä tilavarauksella Unica-datayksikölle. Schuko pistorasia 16 A / 250 V, latausyksiköt 5 V / 2,4 A. Yksikön koko 64x64x421 mm. Väri antrasiitti/alumiiniosat ja harmaa/Kvadrat tekstiiliosat.

Kods: INS44271

PC kabeļi

Extends True 4K signals up to 20m; Reduced EMI and RFI for lower noise interference; Gold-plated connectors for reliable transmissions

Kods: VE781020-AT

PC kabeļi

Unica System+ modulaariset ja helposti asennettavat yksiköt sopivat työpöytäasennuksiin sekä lattiapylväiden koostamiseen. Yksiköt kiinnitetään pylvääseen päätypalan tai välipalan avulla. Ruuvikiinnitys pöytään onnistuu päätypalan avulla ja puristyskiinnitys pöytälevyyn myös päätypalan avulla. Yksiköt kiinnitetään toisiinsa pikaliittimillä (Mini-Wieland). Värivaihtoehtoina valkoinen, antrasiitti, valkoinen/harmaa ja antrasiitti/harmaa. Materiaali alumiini tai alumiini/tekstiili. Tämä yksikkö on varustettu 4 x Schuko pistorasialla, kahdella latausyksiköllä, USB-A ja USB-C sekä tilavarauksella Unica-datayksikölle. Schuko pistorasia 16 A / 250 V, latausyksiköt 5 V / 2,4 A. Yksikön koko 64x64x421 mm. Väri valkoinen.

Kods: INS44256

USB Cables

The Lindy USB Active Extension Hub Pro is a high-performance hub with active cable that allows access to four USB 3.0 SuperSpeed peripherals over long distances. With support for data transfer speeds of up to 5Gbps this extension hub is perfect for transferring large data volumes quickly and reliably. This hub features industry-proven active technology and locking connectors to ensure full signal integrity in the most demanding environments. This 10m extension hub can be used on its own or as part of the Lindy USB 3.0 Active Extension System Pro. This system is a modular solution that can combine multiple USB Active Extension Pro cables and this Active Extension Pro hub. It enables the distribution of USB signals to up to 4 devices at distances of up to 40m (depending on the cable configurations used). Using this hub as part of the USB 3.0 Active Extension System Pro If you would like to use this hub as part of combined Lindy USB 3.0 Active Extension System Pro installation, please note the requirements below. This Active Extension Hub Pro must be installed as the final part of the extension system. The first unit connected to your computer must always be the USB 3.0 Active Extension Pro 8m (No. 43158) or 15m (No. 43229). Once the first cable is connected, you can cascade additional Extension System Pro cables to extend the distance up to a maximum of 40m. The final part of the extension can be any cable or hub from the Extension System Pro range. If you need to extend multiple devices or connect a USB device with high power requirements, you should use the 10m Hub Pro unit with its power supply as the final part of the extension. Information about USB 3.0, 3.1 and 3.2 USB 3.0, USB 3.1 and USB 3.2 PCs, cables and devices are all compatible with each other, when using either a USB Type A or USB Type C host interface.USB 3.0, USB 3.1 Gen 1 and USB 3.2 Gen 1 all support data transfer rates up to 5 Gbps. USB 3.1 Gen 2 and USB 3.2 Gen 2 both support data transfer rates up to 10 Gbps. High performance hub with active cable that provides an extended 10m connection between a computer and up to 4 USB 3.0 devices Can be used standalone or as part of the Lindy Active Extension System Pro to create bespoke extension systems of over 40m (depending on the cable configurations used) Supports the full USB 3.0 SuperSpeed bandwidth for speeds of 5Gbps Easy to use – connects to the deviceandrsquo;s existing USB cable (2m maximum) 2 year warranty

Kods: 43159