Korpusi

Two Aspect 14 PWM fans preinstalled with room to expand up to a total of four 140 mm or six 120 mm fans

Kods: FD-C-NOR1C-02

Korpusi

The H5 Flow RGB boosts airflow and GPU cooling with its perforated PSU shroud, mesh panels, and large radiator support—all in a compact mid-tower form factor.More Air to the GPUMesh PSU shroud maximizes air intake from two 120mm bottom-mounted fans (not included).Fits Large RadiatorsSupports a 360mm radiator in front and a 240mm radiator up top for powerful liquid cooling setups.Optimized for AirflowUltra-fine mesh panels facilitate exceptional airflow and help filter pesky dust particles.Pre-Installed FansFront-mounted F360 RGB Core fan and rear F120Q fan for out-of-the-box cooling and lighting.*Case Version (3-pin DC)Easy Cable ManagementEffortlessly route and conceal cables using the wide channels, hooks, and straps.Tool-less AccessEasily open up the front, side, and top panels without any tools.Strong and SleekCrafted from thick steel and tempered glass for long-lasting quality.The PSU shroud is perforated on the side and bottom, enabling optimal air intake from two 120mm fans (not included)Supports up to a 360mm radiator in front and a 240mm radiator up top for powerful liquid cooling potentialUltra-fine mesh on the top, front, and side panels creates maximum airflow and filters dustEquipped with a front-mounted F360 RGB Core (CV) single-frame fan and rear-mounted F120Q (CV) fan for strong out-of-the-box cooling and lightingEffortlessly route and conceal cables using the wide channels, hooks, and straps

Kods: CC-H52FB-R1

Korpusi

The H7 Flow RGB revolutionizes GPU cooling in a classic mid-tower form factor. Its vertical PSU layout allows space for 3 x 120mm bottom fans, offering efficient cooling without expanding the case footprint.Dedicated GPU CoolingSupports three bottom-mounted 120mm fans for direct GPU cooling in a narrow mid-tower footprint.Angled H7 Flow showing front 3 120mm fansAngled H7 Flow showing front 3 120mm fansOut-of-the-Box PerformanceComes equipped with a F360 RGB Core single-frame fan for out-of-the-box cooling and RGB lighting.Optimized for AirflowHigh-performance mesh panels maximize airflow for both intake and exhaust, as well as filter dust.Large Radiator SupportSupports up to a 420mm radiator in front and 360mm radiator up top for max cooling potential.Easily Manage CablesIntuitive cable management system with wide channels, built-in hooks, and included straps for easy routing.10-Fan CapacityCapacity for up to 10 fans in total: 3 up top, 3 in front, 3 on bottom, and 1 in the rear.Top I/O PortsConveniently access 2 x USB-A and 1 x USB-C ports located on the top panel.Exploded view of H7 Flow panelsExploded view of H7 Flow panelsTool-less Panel AccessTool-less access to the front, top, and side panels makes building and upgrading a breeze.Supports three bottom-mounted 120mm fans for direct GPU cooling while retaining a narrow mid-tower footprintComes equipped with a F360 RGB Core single-frame fan for exceptional out-of-the-box cooling and RGB lightingHigh-performance mesh panels maximize airflow for both intake and exhaust, as well as filter dustSupports up to 420mm radiators in the front and 360mm radiators in the top for powerful cooling potentialIntuitive cable management system with wide channels, built-in hooks, and included straps for easy routingCapacity for up to 10 fans in total: 3 up top, 3 in front, 3 on bottom, and 1 in the rearConveniently access 2 x USB-A and 1 x USB-C ports located on the top panelTool-less access to the front, top, and side panels makes building and upgrading a breeze

Kods: CM-H72FW-R1

Korpusi

Cool ConfidenceMAXIMIZED NATIVE COOLINGSquare-type mesh front panelTUF Gaming GT302 ARGB features an optimized square-type mesh front panel, ensuring unobstructed airflow and great porosity engineered to maximize airflow efficiency. FOUR 140 X 28 MM ARGB FANS INCLUDEDPre-installed 140 x 28 mm ARGB fans (AR140) with extra-thick design yield very high airflow while remaining exceptionally quiet and aesthetically pleasing.INTERCHANGEABLE SIDE PANELSChoose between tempered glass for better system demonstration or a mesh panel for increased ventilation, with either choice providing quick tool-free access.DETACHABLE TOP PANELThe removable top panel makes cable routing and the installation of fans or a radiator easier than ever.SPACE FOR POWERFUL COMPONENTSThe beefiest motherboards and graphics cards can fit, despite the compact dimensions. It also supports ASUS hidden-connector motherboardsFRONT PANEL HIGH-SPEED USB TYPE-C®In addition to two USB-A ports, the TUF Gaming GT302 ARGB front panel features a USB Type-C® port ready to transfer at up to 20 Gbps*.*Actual speed varies by motherboard.EASY PC BUILD EXPERIENCEOPTIMIZED CABLE MANAGEMENTThe TUF Gaming GT302 ARGB comes with a cable grommet bar featuring three large straps to let you neatly organize two sets of cables, and three cable clips on the side for tidy routing of the 8-pin CPU power cable.

Kods: TUFGAMINGGT302ARGB

Korpusi

LIGHT BASE 500 LX BLACKCore performance and aestheticsLight Base 500 LX Black stands for a clean design and the core values of gaming: performance, accessibility and functionality.ELEVATED ELEGANCECool design, cooler GPUThe angled fan frame in the side is not only a testament to elegance and functionality but also directs more air towards the GPU – a part that traditionally requires a lot of it. It provides a neat triangular cutout that works as an efficient air intake. For an easy installation of fans, it slides out to the top. Cable management is easier than ever before with a channel that hides your equipment elegantly. If you install additional fans in the bottom, they line up perfectly with the case floor due to a lowered fan bay.4 PREINSTALLED LIGHT WINGS LXWait, how many fans?!Light Base 500 LX Black features 4 preinstalled Light Wings LX fans. The rear fan is a Light Wings LX 120mm, the fans on the side are Light Wings LX 120mm PWM fans with reversed fan blades. All fans feature 16 LEDs inside their hub of the impeller, making for an unmistakable ARGB illumination. The reversed fan blades make sure that their pretty side is visible at all times.SPACIOUS DESIGNSize matters after allLight Base 500 LX Black might appear compact, but it comes with enough space for a 360mm radiator, an ATX motherboard and graphics cards up to 400mm length. The smart design of the drive bracket features slots for 1 HDD and 2 SSDs at the same time, without impeding the room for cable management behind the motherboard tray.BUSINESS IN THE FRONT...... Party in the back!The motherboard tray fully supports backside connector designs like Asus BTF (Back to Future), MSI Project Zero, and Gigabyte Project Stealth, for a true and cable-free view. To enable backside connector support without giving up a drive slot, the position of the PSU and drive bracket are simply swapped!YES TO ARGBJoin the light sideFor those who appreciate subtle illumination without compromising on performance, the Light Base 500 LX Black adds a touch of sophistication to the core design thanks to the included Light Wings LX fans. An ARGB controller button with predefined lighting effects and colors is integrated into the I/O panel. The preinstalled rear fan and daisy-chained side fans are connected to a 6-way ARGB and PWM hub, leaving 4 free connectors for additional devices.Angled slide-out fan frame on the side routes air directly to the GPUFans can be installed in the lowered fan bay to line up perfectly with the case floor4 preinstalled Light Wings LX 120mm PWM fans for extraordinary airflow and impressive illuminationARGB controller button and ARGB fan hubSpacious design for radiators up to 360mm, and ATX motherboards2 possible PSU positions enable backside connector motherboardsDust filters in the side and the bottom

Kods: BGW85

Korpusi

Fractal Design Computer Case , Mood , Black , mITX , Power supply included No

Kods: FD-C-MOD1N-02

Korpusi

Filtered airflow with a bold, stealth-inspired aesthetic; Spacious adaptable interior for motherboards up to (and including) 285 mm E-ATX; Support for radiators up to 360 mm (front), 420 mm (top) and 280 mm (base); CPU cooler max height: 185 mm; PSU max length: 250 mm (with HDD cage installed)

Kods: FD-C-MES2A-03

Korpusi

Exceptional from every angleBe prepared for virtually any PC component available and make Light Base 600 DX Black your creative show case.LOOK AT ME!Panorama design for perfect visibilityYou deserve to show off what you got. Large window panels on the front and the side allow you to watch your PC components at work anytime. This makes Light Base 600 DX Black the perfect choice as your show case.BRIGHT LIGHTS1.33 meters of LEDsLight Base 600 DX Black is predetermined for the big show. Nothing proves that more than the massive ARGB LED strip which is visible from all angles. The 1.33m long consists of 77 LEDs. With an included ARGB controller button and even more colors and modes with motherboard synchronization, you can make Light Base 600 DX Black truly your own. Express yourself!UP, UP, DOWN, DOWN, LEFT, RIGHT, LEFT, RIGHT…Change the layout in literal secondsIt takes longer to read this text than to invert Light Base 600 DX Black. With its relocatable feet, you can invert the PC case literally in seconds. You can also choose a horizontal layout, which is executed just as quick. No matter which layout your gaming room requires: Light Base 600 DX Black delivers.MAKE IT YOUR CASELarge dimensions for endless creativityLight Base 600 DX Black features no preinstalled fans. However, up to 10 fans can be installed in total, making Light Base 600 DX Black extremely versatile. With its spacious design, it can hold up two 360mm radiators simultaneously, an ATX motherboard and even the most powerful graphics cards. Thanks to the dual chamber design, drives and cables are neatly tucked in the back and do not get in the way of airflow.MAXIMUM USABILITYA new level of convenienceNext to the radiators you can install in the top and the bottom, you can install another radiator with up to 240mm length in the side, for a whopping 3 radiators. On top of that, Light Base 600 DX Black comes with 2 ARGB and PWM hubs that offer 12 connectors in total. Their positions at the top and bottom allow you to conveniently connect your hardware.HOLD MY GPUFor a neat interiorLight Base 600 DX Black features a flexible VGA holder that subtly prevents your GPU from sagging. The best part: This holder works in any orientation and with a horizontally or vertically installed graphics card. The result is a clean look even if you use big and heavy graphics cards.ON THE FLIPSIDE...Support for motherboards with backside connector designThe motherboard tray fully supports backside connector designs like Asus BTF (Back to Future), MSI Project Zero, and Gigabyte Project Stealth, for a true and cable-free view.Fully windowed front and side panel for a stunning panoramic view on all your PC componentsImpressive illumination from every angle with a massive ARGB LED stripCan be switched to inverted or horizontal layout in literal seconds thanks to intuitive handlingSpacious design for up to two 360mm radiators at the same time and an ATX motherboardSupport for motherboards with backside connector design2 ARGB and fan hubs with 12 connectors in total

Kods: BGW65

Korpusi

Fractal Design Meshify 3 , White RGB TG Clear Tint , Mid-Tower , Power supply included No , ATX

Kods: FD-C-MES3A-07

Korpusi

LANCOOL III, the premium mid-tower chassis, offers better thermal performance than LANCOOL II by including 4 pre-installed 140mm PWM fans, and featuring fine mesh panels designed to ensure ample airflow is delivered to the high-end components while the system runs at peak performance.Comes equipped with 3x 140mm ARGB PWM fans that have similar performance as the LANCOOL III RGB 140mm back PWM Fan.EXTREME AIRFLOW CRAFTMANSHIPA fine mesh design has been implemented at the front, top, and both bottom side panels of the LANCOOL III.HINGED PANELS ALL AROUNDThe hinged tempered glass side panels offer an unobstructed view of the interior configuration, while the bottom shroud panels provide quick access to the PSU and storage drives.The two removable 4mm tempered glass panels located on each side of the case can be opened by pulling the front aluminum handle.The mesh panels located on both sides of the PSU shroud area can be removed for cleaning when the front panel is unattached.FLEXIBLE CONFIGURATIONWith ample interior room, the LANCOOL III can offer different cooling and usage scenariosAIR CoolingWith high airflow stock fans, and air tower clearance up to 185mm, the LANCOOL III is ideal for an air-cooling build.AIO CoolingWith ample front intake, the LANCOOL III can provide strong performance for an AIO cooling build. The top fan bracket can support up to 3 x 120mm/140mm fans and offers enough thickness clearance for an AIO with a 420 radiator/fan combo.Custom Water CoolingWith the ability to support 3 × 360mm radiators simultaneously, the LANCOOL III can offer custom water-cooling enthusiasts, lots of imagination.SPACIOUS COOLING SUPPORTThe LANCOOL III is optimized for water-cooling and high-end thermal solutions. A maximum of 10 × 120mm fans or a large 420mm radiator can be mounted in the main chamber.Multi-way Front Fan/Radiator BracketThe multi-way front fan bracket offers 4 different ways to mount a radiator or fans to cater to different cooling needs, and features a new latch/handle mechanism to easily secure it in place without the need of the locking thumbscrews.Removable Top Fan BracketThe removable top fan bracket with offset fan mounting points allows for a thicker fan and radiator combo to be installed at the top of the LANCOOL III by providing enough clearance from the ram.Modular PSU Shroud Bracket – Fan/ Pump/ SSDThe adjustable modular PSU shroud bracket can accommodate 1 x 360mm radiator, 3 x 120mm fans, 3 x 2.5” SSDs, or a pump/reservoir combos.Side Multi-Purpose Mounting SlotsMounting slots beside the motherboard are provided at 105mm apart (standard 120mm fan mounting points) to allow the installation of a distro plate or a reservoir/pump bracket.EXTENSIVE STORAGE CAPACITYMultiple storage drive mounting locations are supported for up to 12 x 2.5” SSDs or 4 x 3.5” HDDs and 8 x 2.5” SSDs.COMPREHENSIVE CABLE MANAGEMENTAs the second chamber located on the right side is visible, great consideration has been given to cable management. The LANCOOL III features an upgraded solution to ensure neat cable routing with toolless magnetic cable cover doors, and a well-organized layout for hubs and cables.Sliding Cable Routing CoverBy slightly loosening the two back thumb screws, the cable cover can be adjusted to fit different sizes of motherboards.REVERSIBLE FRONT I/OOptimized for PC locate on a desk, the front I/O can be relocated to the bottom of the chassis.FRIENDLY PSU INSTALLATIONThe removable PSU mounting bracket allows for PSU installation outside of the chassis, to then slide it in through from the rear.ANTI-SAG BRACKET FOR PERFECTLY HORIZONTAL GPUA GPU anti-sag bracket is included for a seamless display of the hardware through the side tempered glass panels.Mid-tower modular chassis for all kinds of configurationsEquipped with 4 × 140 PWM fans (ARGB or non-RGB)Featured airflow optimized mesh structure and hinged side panelsSupports up to 420 radiator or 3 x 360 radiators and a maximum of 10 fansOffers 12 storage drives mounting locationsUpgraded cable management solution for a clean build

Kods: G99.LAN3RX.00

Korpusi

Built to Flow. Made to Show. The H9 Flow is a spacious, dual-chamber case built for high-performance builds, featuring extensive cooling support and wraparound glass panels for an uninterrupted view of your build. Optimized Airflow Angled front-right fans and an airflow-optimized layout keep temps low and performance steady. Mesh Panels Ultra-fine, high-airflow mesh panels maximize airflow while filtering dust. Spacious Dual-Chamber Separates heat-generating components for improved airflow and a cleaner build. 10-Fan Cooling Fits up to nine 140 mm fans and one 120 mm rear fan. Large Radiator Support Holds up to 420 mm radiators on the top and front-right panels for versatile cooling. Maximum Graphics Handles GPUs up to 435 mm, giving plenty of space for top-tier graphics cards. Back-Connect Ready Compatible with ASUS BTF and MSI Project Zero motherboards for a cable-free look. Easy Cable Management Extra-wide channels, Velcro straps, and tie-down points make cable routing simple. Dual-Chamber Design: Separates main components from the PSU and drives for improved thermal performance and cable management Optimized Airflow: Perforated steel panels and angled front-right fans ensure efficient cooling for high-performance builds Pre-Installed Fans: Includes three F140Q (CV) fans in the front-right and one F120Q (CV) fan in the rear. CV = Case Version (3-pin DC) Ten-Fan Capacity: Supports up to nine 140mm fans across the top, front-right, and bottom, plus one 120mm fan in the rear Panoramic View: Showcase every detail of your build with seamless, wraparound tempered glass paneling Large Radiators & GPUs: Fits up to a 420mm radiator on the top and front-right, with plenty of clearance for high-end graphics cards Easy Cable Management: Extra-wide channels, built-in Velcro straps, and tie-down points make cable routing effortless Back-Connect Ready: Compatible with rear-connecting motherboards like ASUS BTF and MSI Project Zero for a cable-free look

Kods: CM-H92FB-01

Korpusi

Built to Flow. Made to Show. The H9 Flow is a spacious, dual-chamber case built for high-performance builds, featuring extensive cooling support and wraparound glass panels for an uninterrupted view of your build. Optimized Airflow Angled front-right fans and an airflow-optimized layout keep temps low and performance steady. Mesh Panels Ultra-fine, high-airflow mesh panels maximize airflow while filtering dust. Spacious Dual-Chamber Separates heat-generating components for improved airflow and a cleaner build. 10-Fan Cooling Fits up to nine 140 mm fans and one 120 mm rear fan. Large Radiator Support Holds up to 420 mm radiators on the top and front-right panels for versatile cooling. Maximum Graphics Handles GPUs up to 435 mm, giving plenty of space for top-tier graphics cards. Back-Connect Ready Compatible with ASUS BTF and MSI Project Zero motherboards for a cable-free look. Easy Cable Management Extra-wide channels, Velcro straps, and tie-down points make cable routing simple. Dual-Chamber Design: Separates main components from the PSU and drives for improved thermal performance and cable management Optimized Airflow: Perforated steel panels and angled front-right fans ensure efficient cooling for high-performance builds Pre-Installed Fans: Includes three F140Q (CV) fans in the front-right and one F120Q (CV) fan in the rear. CV = Case Version (3-pin DC) Ten-Fan Capacity: Supports up to nine 140mm fans across the top, front-right, and bottom, plus one 120mm fan in the rear Panoramic View: Showcase every detail of your build with seamless, wraparound tempered glass paneling Large Radiators & GPUs: Fits up to a 420mm radiator on the top and front-right, with plenty of clearance for high-end graphics cards Easy Cable Management: Extra-wide channels, built-in Velcro straps, and tie-down points make cable routing effortless Back-Connect Ready: Compatible with rear-connecting motherboards like ASUS BTF and MSI Project Zero for a cable-free look

Kods: CM-H92FW-01