Komutatori

MANAGED ETHERNET SWITCH TSW212 is an L2 managed Ethernet switch with additional L3 features, like DHCPv6 client support and static IPv6 routing. This switch supports protocols, including EtherNet/IP, PROFINET, and MRP, and has 8 Gigabit Ethernet ports and 2 SFP ports to ensure robust long-range fibre optic communication.

Kods: TSW212

Komutatori

System OverviewDH-PFS3010-8ET-96 is an unmanaged Desktop Switch with 8 × 10/100Mbps PoE Ports. It provides 8 × 10/100 Mbps Ethernet ports and 2 × 10/100/1000 Mbps uplink ports. The product is equipped with two types of transmission modes (Extend Mode On/Extend Mode Off). The red port supports the IEEE802.3bt and the Hi-PoE standards. The maximum power consumption is 90W. It also supports PoE watchdog to avoid manually maintenance and device restart, which can realize the intelligent management and reduce the cost.Intelligent PoEAdopt PoE power consumption management strategy, and supply power to important ports first. When total power consumption exceeds the set threshold value of the system, power down the ports from large port number to small port number. Adopt smart detection to prevent outage. Supply power with ultra-wide power range, and adapt to IPC power consumption fluctuations in severe environment.BT 90WThe red port supports the IEEE802.3bt and the Hi-PoE standards. The maximum power consumption is 90 W.PoE WatchdogAdopt the PoE watchdog function to avoid manually maintenance and device restart, which can realize the intelligent management and reduce the cost.Long Distance PoEBreaking the IEEE 100 m transmission limit, the device supports 250 m long distance PoE transmission with a more flexible networking.8-pin Assignment PoE Power SupplyThe Eight-PIN Ethernet port supports power supply, to enhance frontend and rear-end compatibility. Reduce cable loss and promote loading capacity.SceneThe device is applicable for use in different scenarios, including home, office, server farm, and small mall.> Intelligent PoE> 8-pin assignment PoE power supply> Long distance PoE> PoE watchdog> Wide working temperature

Kods: DH-PFS3010-8ET-96-V2

Komutatori

D-Link , 10 Gigabit port Switch with PoE , DGS-1010MP , Unmanaged , Desktop / Rackmount , Gigabit Ethernet (copper) ports quantity 1 , SFP ports quantity 1 , Power over Ethernet (PoE) ports quantity 8

Kods: DGS-1010MP/E

Komutatori

ZYXEL GS1100-16EPS 16 PORT GIGABIT - DIP SELECTOR UNMANAGED SWITCH

Kods: GS1100-16EPS-EU0101F

Komutatori

LANBERG Switch rack 19inch RSFE-24P-2C-360 24x 100Mb PoE+ 2x Combo Gigabit 360W

Kods: RSFE-24P-2C-360

Komutatori

With 16 PoE+ ports, transfers data and power on one single cableCompliance with IEEE 802.3af/at PoE+, the switch supports PoE Power up to 30 W for each PoE portSupports PoE Power up to 120 W for all PoE ports*Up to 250 m data and power transmission range under Extend Mode**Priority Mode ensures high priority of ports 1–4 to guarantee the quality of the sensitive applicationsIsolation Mode allows one-click client traffic separation for higher security and performanceAutomatically reboots your dropped or unresponsive PoE-powered devices with PoE Auto RecoveryPlug and play with no configuration required

Kods: TL-SG116P

Komutatori

Installation type: 10 inch, Desktop

Kods: DN-95317-1

Komutatori

The Device is a layer-2 commercial switch. It has a high-performance switching engine and a large buffer memory to ensure smooth video stream transmission. With a full-metal and fanless design, the Device features great heat dissipation capability on the shell surface. The Device is an unmanaged switch, so it does not need to be configured through web interface, which simplifies installation. Plug and Play Hassle-free, it does not require any configuration. Simply use after it is powered on. Full Line-rate Forwarding The ports perform error-free forwarding of frames at high speeds while under a full load. Easy Installation Supports desktop, rack mounting and wall mounting, suitable for various scenarios. Flexible Application Suitable for use in a wide variety of scenes to meet your requirements. Port Isolation Devices under different ports are prevented from communicating with each other, without need of VLAN being configured. Data is also protected from being leaked from the PoE ports and broadcast storms are isolated, making the network safe and easy to use. Link Aggregation Combines multiple physical links into one virtual channel for dynamic redundancy and load balancing, ensuring that the connection remains stable. 24 × RJ-45 10/100/1000 ports The all-gigabit ports transmit data without lag Features aggregation mode which aggregates uplink ports Features isolation mode which isolates all the ports from each other With its solid full metal design, the device has great heat dissipation and no fan Supports rack mount, wall mount and desktop mount

Kods: DH-S3024-24GT

Komutatori

OverviewTL-SG1210PP is an unmanaged switch with 10 Gigabit ports that requires no configuration and provides 8 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at/bt compliant Powered Devices (PDs) at port 1-2 and IEEE 802.3af/at compliant Powered Devices (PDs) at port 3-8. In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.Power Over Ethernet8 RJ45 ports (port 1 to port 8) of the switch support Power over Ethernet (PoE) function. They can automatically detect and supply power with those IEEE 802.3af/at/bt compliant Powered Devices (PDs) at port 1-2 and IEEE 802.3af/at compliant Powered Devices (PDs) at port 3-8.Overload ArrangementTL-SG1210PP has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is ≥ 123 W*, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.Intelligent Power ManagementPriority (port 1 > port 2 ……> port 8): This function will help protect the system when the system power is overloaded. For example, port 3, 4, 5 and 6 is using 25 W respectively (maximum power per port is 30 W); the system power is 100 W in total. If there is an additional PD inserted to port 1 with 35 W, and then the system will cut off the power of port 6 because of the overloaded power, this means port 3, 4 and 5 will use 25 W respectively and port 1 will use 35 W, no power will be supplied to port 6.Highlight Performance• Up to 250 m PoE power supply and data transmission under Extend Mode** for port 1-4.• Priority Mode ensures high priority of ports 1–2 to guarantee the quality of the sensitive applications• Isolation Mode allows one-click client traffic separation for higher security and performance• With PoE Auto Recovery, the switch will constantly detect the data transmission with PoE-powered devices (PD) for port 1-8. When the switch finds that a PD stops sending data packets to the switch for a long period, the switch will reboot it automatically.TL-SG1210PP is easy to install and use. It requires no configuration and installation. With desktop and wall mountable design, outstanding performance and quality, the TP-Link 10-Port Gigabit Desktop Switch with 8-Port PoE+ and 2-Port PoE++ TL-SG1210PP is a great selection for expanding your network.9× 10/100/1000Mbps RJ45 Ports, 1× 1000Mbps Combo SFP/RJ45 PortWith 2× PoE++ ports and 6× PoE+ ports, transfers data and power on one single cableWorks with IEEE 802.3af/at/bt compliant PDs802.1p/DSCP QoS enable smooth latency-sensitive trafficSupports PoE Power up to 30 W for each PoE+ port and 60 W for PoE++ portSupports PoE Power up to 123 W for all PoE ports*Plug and Play, no configuration and installation requiredUp to 250m data and power transmitting range under Extend Mode**PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devicesIsolation Mode allows one-click client traffic separation for higher security and performancePriority Mode guarantees the quality of sensitive applications like video monitoring in critical business areas by prioritizing the data of ports 1-2

Kods: TL-SG1210PP

Komutatori

The USW-Lite-8-PoE is a fully managed Layer 2 switch with eight Gigabit Ethernet ports for your RJ45 Ethernet devices. Four ports also offer auto-sensing 802.3at PoE+ that provide up to a total PoE wattage of 52W for UniFi Access Points or other PoE devices. Managed and configured by the UniFi Network Controller with UniFi mobile app support, the USW-Lite-8-PoE offers Layer 2 switching protocols and features. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere.(8) Gigabit RJ45 ports including (4) 802.3at PoE+ portsManaged by UniFi Controller (5.13.10 or later)External 60W power adapterWall-mountable (Kit included)

Kods: USW-LITE-8-POE

Komutatori

24-port GbE Smart Managed Switch The Smart Managed GS1900 Series switch feature with web-based interface to manage advanced functions such as VLAN, QoS, IGMP Snooping, Link Aggregation (LAG), IPv6 and DoS prevention easily. Also, the user-friendly wizard helps to walk through setup, configuration and even advanced settings quickly. Total port count: 24 100/1000 Mbps: 24 Switching capacity (Gbps): 48 Forwarding rate (Mpps): 35.7 Input: 100 - 240 V AC, 50/60 Hz Max. power consumption (watt): 15.6 Dimensions (WxDxH) (mm/in.): 267 x 162 x 42/10.51 x 6.37 x 1.6 Weight (kg): 1.56 Acoustic noise (min/max, dBA): 0

Kods: GS1915-24E-EU0101F

Komutatori

The CRS305 is a compact yet very powerful switch, featuring four SFP+ ports, for up to 10 Gbit per port. The device has a 1 Gbit copper ethernet port for management access and two DC jacks for power redundancy. The device is a very sleek and compact metallic case without any fans, for silent operation.The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS. If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with a disruptive price, providing the best price/performance on the market.

Kods: CRS305-1G-4S+IN