Korpusi

Corsair PC Case , Frame 4000D Modular , White , Mid-Tower , Power supply included No

Kods: CC-9011291-WW

Korpusi

SLIGHTLY BIGGER CASE, WAY MORE CAPACITYOnly 2L larger than the original O11D Mini, but redesigned for greater hardware compatibility and improved airflow.ATX BACK-CONNECT MOTHERBOARD SUPPORTThe case offers broad motherboard support, including standard ATX, M-ATX, and Mini-ITX form factors. For users seeking next-level cable management and cleaner builds, Back-Connect compatibility is exclusively available with ATX Back-Connect motherboards.ANGLED BASE FOR DIRECT GPU AIRFLOWA 10° slanted bottom channels cool air directly to the GPU for better cooling performance and a cleaner look.THE FLOW EDITION IS PRE-INSTALLED WITH FIVE REVERSE-BLADE FANSFlow versions come with five reverse blade PWM fans—three at the bottom and two on the side, for strong, silent airflow right out of the box.OPTIMIZED FOR GPU COOLINGThe slanted bottom design and pre-installed fans channel airflow directly to the GPU, enhancing cooling efficiency. In thermal testing under identical noise levels, the O11D MINI V2 FLOW achieved significantly better GPU thermals, registering a 3.1°C improvement over the LANCOOL 207, or approximately 6% better GPU cooling performance.ADJUSTABLE MOTHERBOARD STANDOFFS FOR RADIATOR FLEXIBILITYThis case features movable motherboard standoffs, allowing vertical adjustment of the M-ATX mounting position. This flexibility enhances compatibility with 280mm radiators, as well as thicker 360mm or 240mm models.AIRFLOW COVERS FOR PREVENTED PRESSURE LEAKTool-less fan cover brackets help seal off unused fan mounts, concentrating airflow where it matters most.TOP OR BOTTOM I/O FOR FLEXIBLE SETUPThe I/O module supports top or bottom placement, offering flexibility for various build layouts and desk arrangements. IMPROVED AIRFLOW AND PORTABILITY WITH REMOVABLE BOTTOM I/O AND COVERWith the I/O module relocated to the top, the lower I/O and cover can now be removed to enhance bottom intake airflow. An optimization aimed at improving thermal efficiency and ease of transport.GPU ANTI-SAG SUPPORTHorizontal and Vertical GPU brackets are included out of the box, giving users the freedom to choose their GPU orientation.ADJUSTABLE ANTI-SAG BRACKET FOR VERTICAL GPUThe vertical GPU support bracket features height adjustment to accommodate thick cards and prevent GPU sag.BUILT-IN 24-PIN CABLE BRACKET FOR A CLEAN, PROFESSIONAL LOOKThis case comes with a built-in cable bracket that holds the 24-pin ATX power cable firmly in place, keeping it aligned and secure. This reduces strain on the connector and helps maintain a neat, organized appearance.BUILD SMARTER WITH 9 DEDICATED CABLE STRAPSThoughtfully positioned for different assembly zones, our cable straps make cable routing simpler and cleaner, even in tight spaces. Whether you’re a first-time builder or a seasoned pro, this smart design ensures a faster, neater, and more enjoyable building experience.DUAL-PURPOSE DRIVE CAGES WITH CABLE STORAGEDual-purpose drive cages accommodate 2.5″ and 3.5″ HDDs or offer dedicated space for cable management, ensuring a clean and tidy build.DESIGNED FOR TIGHT SPACES, BUILT FOR AESTHETIC EXCELLENCEEngineered to maximize clearance in compact setups, the bottom cable grommets provide optimized pathways for your cables, ensuring functional flexibility and a seamless, uncluttered build aesthetic.ALUMINUM FEET FOR STABILITY AND STYLEMachined aluminum feet enhance case stability while contributing to a refined overall aesthetic.Precision resized 45.38L chassis offers expanded hardware support with a compact footprintPillar-less tempered glass front and side panels for an unobstructed internal view10° slanted bottom improves GPU airflow and aesthetic presentationSupports ATX, M-ATX, Mini-ITX, and ATX Back-Connect motherboardsAccommodates 400mm long GPUs, 160mm tall CPU coolers, and ATX PSU (Under 200mm)Supports up to 360mm top radiator, 240mm side radiator, and 9 x 120mm fansIncludes horizontal and vertical GPU anti-sag brackets for heavy GPU support

Kods: G99.O11DMIV2X.00

Korpusi

Unique, honeycomb patterned mesh front creates a striking effect and provides access to fan-powered cooling

Kods: FD-C-POR1A-01

Korpusi

Fractal Design Case , Pop 2 Air , Black TG , ATX , Power supply included No

Kods: FD-C-POA2A-02

Korpusi

Fractal Design Case , Pop 2 Air , Black Solid , ATX , Power supply included No

Kods: FD-C-POA2A-01

Korpusi

NZXT PC case H5 Flow midi tower white window

Kods: CC-H52FW-01

Korpusi

Genesis Gaming PC Case , Diaxid 605 ARGB , White , Midi Tower , Power supply included No

Kods: NPC-2173

Korpusi

Genesis Gaming PC Case , Diaxid 605 ARGB , Black , Midi Tower , Power supply included No

Kods: NPC-2172

Korpusi

COUGAR DUOFACE PRO RGB PC Case, Mid Tower, Black

Kods: CGR-DUOFACE PRO RGB

Korpusi

LANCOOL 216AIRFLOW FOCUSThe LANCOOL 216 is a mainstream case that features all-around mesh panels for optimal airflow. Thanks to its modular rear panel, it can be optimized for air cooling or water cooling. It includes 2 x 160mm and 1 x 140mm pre-installed PWM fans and an innovative rear PCIe fan bracket to maximize airflow.CONTINUOUS FRONT TO TOP MESHTo ensure adequate airflow is provided to the system, the LANCOOL 216 features mesh at the front, top, and on the PSU shroud’s side*. The front mesh extends to the top for a continuous mesh pane2 x 160MM FRONT FANSAND 1 X 140MM REAR FAN INCLUDEDLANCOOL 216RGB FANSThe included 160mm ARGB fans feature two channels of LEDs (one on the outer rim of the fan, another at the shaft of the fan blades) that can be controlled separately via an optional accessory, or via the motherboard lighting software by connecting them directly to a motherboard 5V 3pin header.Located in the second chamber behind the motherboard, a SATA-powered fan hub can support up to 4x ARGB and PWM fans.AIR COOLING MODE / WATER COOLING MODEThe modular motherboard I/O allow users to move the motherboard to a higher position which is more favorable for air-cooled systems, or a lower position for water-cooled systems.AIR COOLINGSet higher, the motherboard leaves room above the PSU shroud for wider fans.WATER COOLINGSet lower, the motherboard leaves a 63mm thick gap at the top to install radiator/fan combos, ideal for AIOs or custom water cooling.FRONT I/O CAN BE RELOCATEDIncluding a power button, reset button, audio port, 2x USB3.0 ports, and a USB Type C port, the front I/O module can be relocated to the lower left side of the front panel.HARDWARE COMPATIBILITYThe LANCOOL 216 supports ATX, Micro-ATX, MINI-ITX motherboards, and E-ATX under 280mm in width (when the grommet bar is flipped 180°). In addition, thanks to its symmetrical design, cable management in the 2nd chamber remains unaffected.LATEST GEN. GPU READYWith enough room for graphics cards up to 392mm in length, and 180mm in height (for air cooling mode), the LANCOOL 216 is compatible with even the largest NVIDIA 4000 series cards.PRESSURE LEAK FREEPre-installed at the front of the top radiator bracket, a seal plate ensures no pressure leak is created when installing smaller than a 360 radiator/3x120mm fans at the top.REMOVEABLE TOP RADIATOR BRACKETThe top mounting bracket can be completely removed from the case for easier hardware installation. The bracket comes off with the left side frame bar to provide optimal clearance. Two grooves have been implemented to allow easy passage of fan cables into the second chamber of the case, simplifying cable management and making the overall look of the build better.PCIE FAN BRACKETThe GPU placed at the top of the expansion slots in air cooling mode opens up the possibility to add a 120mm fan at the rear of the case without obstructing the GPU I/O. This is also possible with a vertically mounted GPU in both air-cooled and water-cooled mode. The additional 120mm fan provides better cooling for the GPU and a greater intake/exhaust balance for the system.VERTICAL GPU COMPATIBLEThe PCIe expansion slot panel can be rotated to vertically install the GPUs, only an additional riser cable is required. STORAGEUP TO 6 x SSD + 2 X HDD STORAGE CAPACITYA total of 2 x 3.5” + 6 x 2.5” drives can be installed with dedicated mounts for storage.CABLE MANAGEMENTThe LANCOOL 216 offers multiple options for easy cable management. Along the cable grommet bar, 3 large velcro straps can hold 2 different sets of cables. 3 small clips are located along the rear side panel, ideal for cleanly routing the CPU 8pin cable, and 2 additional velcro straps are located near the PSU chamber to help hold down the extra PSU cable length away from the ventilation path in the bottom chamber.OPTIONAL ACCESSORIESARGB CONTROL & USB MODULEAn additional ARGB control & USB module can be installed at the side of the front panel to provide better control over the front ARGB fans. The ARGB control & USB module offers the option to create custom lighting styles by mixing the light effects of both LED channels individually.DUST FILTERFor users who take dust management to the next level, a magnetic front panel dust filter is available as an optional accessory. The dust filter fits perfectly between the front panel and the front fans.PCIE CABLEFor vertical GPU mounting, only an additional riser cable is required. With a PCB that has a hole spacing of 112.7mm, the Lian-Li PCIe 4.0 X16 RISER CABLE is compatible with the LANCOOL 216. Mid-tower chassis configurable for air cooling and water coolingAirflow optimized front, top and PSU shroud side mesh panelsEquipped with 2 x front 160 PWM fans (ARGB or non-RGB) and 1 x rear 140mm PWM fanSupports 360 radiator at the top, front and a maximum of 10 fansIncludes rear PCIe fan bracketFront I/O that can be relocated to the bottomExtensive cable management solution

Kods: G99.LAN216X.00

Korpusi

SLIGHTLY BIGGER CASE, WAY MORE CAPACITYOnly 2L larger than the original O11D Mini, but redesigned for greater hardware compatibility and improved airflow.ATX BACK-CONNECT MOTHERBOARD SUPPORTThe case offers broad motherboard support, including standard ATX, M-ATX, and Mini-ITX form factors. For users seeking next-level cable management and cleaner builds, Back-Connect compatibility is exclusively available with ATX Back-Connect motherboards.ANGLED BASE FOR DIRECT GPU AIRFLOWA 10° slanted bottom channels cool air directly to the GPU for better cooling performance and a cleaner look.THE FLOW EDITION IS PRE-INSTALLED WITH FIVE REVERSE-BLADE FANSFlow versions come with five reverse blade PWM fans—three at the bottom and two on the side, for strong, silent airflow right out of the box.OPTIMIZED FOR GPU COOLINGThe slanted bottom design and pre-installed fans channel airflow directly to the GPU, enhancing cooling efficiency. In thermal testing under identical noise levels, the O11D MINI V2 FLOW achieved significantly better GPU thermals, registering a 3.1°C improvement over the LANCOOL 207, or approximately 6% better GPU cooling performance.ADJUSTABLE MOTHERBOARD STANDOFFS FOR RADIATOR FLEXIBILITYThis case features movable motherboard standoffs, allowing vertical adjustment of the M-ATX mounting position. This flexibility enhances compatibility with 280mm radiators, as well as thicker 360mm or 240mm models.AIRFLOW COVERS FOR PREVENTED PRESSURE LEAKTool-less fan cover brackets help seal off unused fan mounts, concentrating airflow where it matters most.TOP OR BOTTOM I/O FOR FLEXIBLE SETUPThe I/O module supports top or bottom placement, offering flexibility for various build layouts and desk arrangements. IMPROVED AIRFLOW AND PORTABILITY WITH REMOVABLE BOTTOM I/O AND COVERWith the I/O module relocated to the top, the lower I/O and cover can now be removed to enhance bottom intake airflow. An optimization aimed at improving thermal efficiency and ease of transport.GPU ANTI-SAG SUPPORTHorizontal and Vertical GPU brackets are included out of the box, giving users the freedom to choose their GPU orientation.ADJUSTABLE ANTI-SAG BRACKET FOR VERTICAL GPUThe vertical GPU support bracket features height adjustment to accommodate thick cards and prevent GPU sag.BUILT-IN 24-PIN CABLE BRACKET FOR A CLEAN, PROFESSIONAL LOOKThis case comes with a built-in cable bracket that holds the 24-pin ATX power cable firmly in place, keeping it aligned and secure. This reduces strain on the connector and helps maintain a neat, organized appearance.BUILD SMARTER WITH 9 DEDICATED CABLE STRAPSThoughtfully positioned for different assembly zones, our cable straps make cable routing simpler and cleaner, even in tight spaces. Whether you’re a first-time builder or a seasoned pro, this smart design ensures a faster, neater, and more enjoyable building experience.DUAL-PURPOSE DRIVE CAGES WITH CABLE STORAGEDual-purpose drive cages accommodate 2.5″ and 3.5″ HDDs or offer dedicated space for cable management, ensuring a clean and tidy build.DESIGNED FOR TIGHT SPACES, BUILT FOR AESTHETIC EXCELLENCEEngineered to maximize clearance in compact setups, the bottom cable grommets provide optimized pathways for your cables, ensuring functional flexibility and a seamless, uncluttered build aesthetic.ALUMINUM FEET FOR STABILITY AND STYLEMachined aluminum feet enhance case stability while contributing to a refined overall aesthetic.Precision resized 45.38L chassis offers expanded hardware support with a compact footprintPillar-less tempered glass front and side panels for an unobstructed internal view10° slanted bottom improves GPU airflow and aesthetic presentationSupports ATX, M-ATX, Mini-ITX, and ATX Back-Connect motherboardsAccommodates 400mm long GPUs, 160mm tall CPU coolers, and ATX PSU (Under 200mm)Supports up to 360mm top radiator, 240mm side radiator, and 9 x 120mm fansIncludes horizontal and vertical GPU anti-sag brackets for heavy GPU support

Kods: G99.O11DMIV2W.00

Korpusi

The LIAN LI & DAN Cases A3-mATX is a versatile M-ATX mesh PC case that maintains a minimal chassis size while accommodating large components. Thanks to the relocatable PSU bracket, the A3-mATX empowers you to build a powerful and compact PC system tailored to your needs and preferences.COMPACT DESIGN,MASSIVE POTENTIALDive into the realm of compactness with the A3-mATX, which unlocks the potential of a small form factor PC case.WELL VENTILATED, MINIMALIST DESIGNWith three sides featuring minimalist mesh panels and a sleek front panel, the A3-mATX combines functionality with style, making it the perfect touch to your setup.The A3-mATX Wood Edition front panel is made of a sophisticated black walnut trim, make is a perfect balance of style and functionality.EFFORTLESS MODULARITY, STREAMLINED BUILDSThe toolless removal of all exterior panels and modular brackets provide easier access for installation and cable management. With a removable bottom dust filter, ensuring the system stays clean and efficient.VERSATILE COMPATIBILITY, ULTIMATE CUSTOMIZATIONUnleash your creativity with the flexible compatibility A3-mATX without compromising on high-performance, large size components.The A3-mATX case accommodates a maximum CPU cooler height of 165mm and a 4-slot thick GPU with a maximum length of 415mm. Note that with a 25mm thick fan installed at the bottom, the GPU thickness will be limited to 61mm, allowing for only a 3-slot GPU. Additionally, when installing a radiator and fan combo, there will be no space for the GPU.The anti-sag GPU bracket is included in the box to ensure the perfect alignment of the graphics card.SPACE MAXIMIZED FOR COOLINGMaximizing the cooling capacity of this 26.3 liter case, 360mm AIO can be mounted to efficiently cool high-end components.FLEXIBLE PSU INSTALLATIONOffers multiple mounting slots for a maximum of 220mm ATX/SFX/SFX-L or LIAN LI Edge PSU for ideal PSU placement to best suit your build requirements.Includes an ATX PSU offset bracket in order to allow longer GPU installation at positions F2 and F2.5Supports front installation of ATX PSU by mounting it on the SSD bracket using the standoff tool.The wooden edition open-space design of the front panel allows for optimal airflow, ensuring fresh air intake for the PSU when the PSU is mounted at the front with the fan facing outward, enhancing cooling efficiency.ADAPTABLE STORAGE SOLUTIONSProvides 3 drive bays to meet storage needs in a comprehensive build.REMOVABLE SSD TRAYUse the same mounting point as the PSU bracket, can relocate as needed. 2 × 2.5” SSDBOTTOM DRIVE SPACEOffers a mounting point at the bottom of the chassis. 1 × 2.5” SSD or 1 × 3.5” HDDSEAMLESS CONNECTIVITY, STYLISH IOWith its front IO featuring essential ports and buttons, along with a sleek and stylish front panel design, the A3-mATX ensures seamless connectivity while showcasing on the desk.AVAILABLE IN 2 COLORS AND A SPECIAL EDITIONOffering 2 color choices that combine innovative design, flexible cooling solutions, and extensive compatibility options, making it an ideal choice for enthusiasts seeking a compact yet powerful M-ATX case.A DAN CASES COLLABORATIONCombining the design of Daniel Hansen from DAN Cases with LIAN Li’s manufacturing prowess, the collaboration brings the A3-mATX to life.VERTICAL GPU KIT (A3-1X/ A3-1W)Supports up to 3 slots thick GPU at vertical display with an 150mm PCIe4.0 riser cable.LEFT SIDE TEMPERED GLASS PANEL (A3-2X/A3-2W)Display of the interior components can be achieved with the accessory.Minimalistic sleek design 26.3L micro form factor chassisSide and top panels are designed with steel meshAccommodates M-ATX and ITX motherboard with 4 slots 415mm large GPUSupports up to 360 radiator and 10 x 120mm fansSupports ATX/SFX/SFX-L and LIAN LI Edge PSU that can be mounted sideways or frontwaysIn collaboration with DAN Cases for the case design whereas manufactured and sold by LIAN LI

Kods: G99.A3X-WD.00